Breathtaking Wire Fan And Light To Two Switches

The red wire is spliced to the output on the.

Wire fan and light to two switches. Connect one wire to the first switch in the box and the second wire to the other switch and connect the black wire from each of the lights to the other terminal on its respective switch. The ceiling fan with two switches will have two sets of wires. 2 wire cable power out to the second ceiling outlet box.

This means that you will have black red white and bare. Both of the hot wires connect to a switch. Slice open a spare length of cable that is 6 inches long with a utility knife and remove the black and bare wires.

3 wire cable switch legs from first ceiling outlet down to a 2 gang box for the first set of switches for ceiling fan light control. Screw the fan in place. Remove 1 2 inch of insulation from both ends of the black wire.

This video is about how to wire an existing ceiling fan for separate switches to control fan and light. Attach each hot wire from the fan to a hot wire in the ceiling. The power source will either enter at the switch box or up at the light fixture or the exhaust fan.

From the switches 3 wire cable runs to the ceiling outlet box. You will then want to remove one fan blade in order to gain access to the fan canopy. Attach the neutral wires together and place the bare wire around some of the metal of the bracket in the ceiling.

Ceiling fan wiring two switches this ceiling fan wiring configuration is quite common. 3 wire cable from 2 nd ceiling outlet down to the second 2 gang box for fan light control. The hot wires are either black or red the white wires are neutral and the bare one is the ground wire.